Liqui Moly Formula Super 20W-50 (4 Liter)

Rs.9,499

Mineral-based motor oil. Ensures a stable lubricating film. Offers optimum oil pressure under all operating conditions. High safety reserves under extreme loads.

Approvals: ACEA A3/B4, E2, API SL, Allison C4, MIL-L 2104 E

LIQUI MOLY recommends this product for vehicles with the following specifications: Caterpillar TO-2, MAN 271, MB 228.3

suitable for gasoline and diesel engines with and without exhaust-gas turbocharging
low evaporation loss
good cleaning action
high shear stability
high wear resistance

Available pack sizes

4L Canister plastic (21182)

Intended use

All-year oil for gasoline and diesel engines. Especially suitable for older vehicles – also with retrofit catalytic converter. Tested safe with catalytic converters and turbochargers.

Properties

prevents black sludge
high shear stability
mixable with all commercially available motor oils
very good dispersion properties
tested for catalytic converters
low evaporation loss
high wear resistance suitable for gasoline and diesel engines with and without exhaust-gas turbocharging
optimum stability to aging
good cleaning action
oil film strength

Technical data

SAE class (engine oils) 20W-50 SAE J300
Density at 15 °C 0,890 g/cm³ DIN 51757
Viscosity at 40 °C 153 mm²/s ASTM D 7042-04
Viscosity at 100 °C 18,1 mm²/s ASTM D 7042-04
Viscosity at -20°C (MRV) < 60000 mPas ASTM D4684
Viscosity at -15°C (CCS) <= 9500 mPas ASTM D5293
Viscosity index 132 DIN ISO 2909
HTHS at 150°C >= 3,7 mPas ASTM D5481
Pour point -30 °C DIN ISO 3016
Evaporation loss (Noack) 7,2 % CEC-L-40-A-93
Flash point 240 °C DIN ISO 2592
Total base number 9,0 mg KOH/g DIN ISO 3771
Sulfate ash 1,0 – 1,6 g/100g DIN 51575
Color number (ASTM) L5,5 DIN ISO 2049

Areas of application

Universal motor oil for gasoline and diesel engines (aspirated diesel engines and diesel engines with exhaust gas turbocharging, with and without charge air cooler). Especially suitable where there are long intervals between oil changes and extreme operating conditions.

Application

The operating instructions of the motor vehicle and engine manufacturer must be followed.

We Also Recommend

Liqui Moly Molygen New Generation 5W-30 (4 Liter)

Rs.11,599

Liqui Moly Mos2 10W-40 (4 Liter)

Rs.10,750

Liqui Moly Formula Super 15W-40 (4 Liter)

Rs.9,499

Sold Out

Liqui Moly Touring High Tech- SHPD 20W-50 (5 Liter)

Rs.11,999

Sold Out

Liqui Moly Formula Super 20W-50 (1 Liter)

Rs.1,750

Liqui Moly Formula Super 20W-50 (4 Liter)

Pay Cash On Delivery *

Free delivery **

* Only for Pakistan

** Not valid for tyres or heavy items

Note: Any order above 10 thousand require upfront money using Bank transfer or Easy Paisa

Rs.9,499 PKR

Mineral-based motor oil. Ensures a stable lubricating film. Offers optimum oil pressure under all operating conditions. High safety reserves under extreme loads.

Approvals: ACEA A3/B4, E2, API SL, Allison C4, MIL-L 2104 E

LIQUI MOLY recommends this product for vehicles with the following specifications: Caterpillar TO-2, MAN 271, MB 228.3

suitable for gasoline and diesel engines with and without exhaust-gas turbocharging
low evaporation loss
good cleaning action
high shear stability
high wear resistance

Available pack sizes

4L Canister plastic (21182)

Intended use

All-year oil for gasoline and diesel engines. Especially suitable for older vehicles – also with retrofit catalytic converter. Tested safe with catalytic converters and turbochargers.

Properties

prevents black sludge
high shear stability
mixable with all commercially available motor oils
very good dispersion properties
tested for catalytic converters
low evaporation loss
high wear resistance suitable for gasoline and diesel engines with and without exhaust-gas turbocharging
optimum stability to aging
good cleaning action
oil film strength

Technical data

SAE class (engine oils) 20W-50 SAE J300
Density at 15 °C 0,890 g/cm³ DIN 51757
Viscosity at 40 °C 153 mm²/s ASTM D 7042-04
Viscosity at 100 °C 18,1 mm²/s ASTM D 7042-04
Viscosity at -20°C (MRV) < 60000 mPas ASTM D4684
Viscosity at -15°C (CCS) <= 9500 mPas ASTM D5293
Viscosity index 132 DIN ISO 2909
HTHS at 150°C >= 3,7 mPas ASTM D5481
Pour point -30 °C DIN ISO 3016
Evaporation loss (Noack) 7,2 % CEC-L-40-A-93
Flash point 240 °C DIN ISO 2592
Total base number 9,0 mg KOH/g DIN ISO 3771
Sulfate ash 1,0 – 1,6 g/100g DIN 51575
Color number (ASTM) L5,5 DIN ISO 2049

Areas of application

Application

The operating instructions of the motor vehicle and engine manufacturer must be followed.

comments powered by Disqus

Liqui Moly Formula Super 20W-50 (4 Liter)

Rs.9,499

Mineral-based motor oil. Ensures a stable lubricating film. Offers optimum oil pressure under all operating conditions. High safety reserves under extreme loads.

Approvals: ACEA A3/B4, E2, API SL, Allison C4, MIL-L 2104 E

LIQUI MOLY recommends this product for vehicles with the following specifications: Caterpillar TO-2, MAN 271, MB 228.3

suitable for gasoline and diesel engines with and without exhaust-gas turbocharging
low evaporation loss
good cleaning action
high shear stability
high wear resistance

Available pack sizes

4L Canister plastic (21182)

Intended use

All-year oil for gasoline and diesel engines. Especially suitable for older vehicles – also with retrofit catalytic converter. Tested safe with catalytic converters and turbochargers.

Properties

prevents black sludge
high shear stability
mixable with all commercially available motor oils
very good dispersion properties
tested for catalytic converters
low evaporation loss
high wear resistance suitable for gasoline and diesel engines with and without exhaust-gas turbocharging
optimum stability to aging
good cleaning action
oil film strength

Technical data

SAE class (engine oils) 20W-50 SAE J300
Density at 15 °C 0,890 g/cm³ DIN 51757
Viscosity at 40 °C 153 mm²/s ASTM D 7042-04
Viscosity at 100 °C 18,1 mm²/s ASTM D 7042-04
Viscosity at -20°C (MRV) < 60000 mPas ASTM D4684
Viscosity at -15°C (CCS) <= 9500 mPas ASTM D5293
Viscosity index 132 DIN ISO 2909
HTHS at 150°C >= 3,7 mPas ASTM D5481
Pour point -30 °C DIN ISO 3016
Evaporation loss (Noack) 7,2 % CEC-L-40-A-93
Flash point 240 °C DIN ISO 2592
Total base number 9,0 mg KOH/g DIN ISO 3771
Sulfate ash 1,0 – 1,6 g/100g DIN 51575
Color number (ASTM) L5,5 DIN ISO 2049

Areas of application

Application

The operating instructions of the motor vehicle and engine manufacturer must be followed.