Menu
Cart 0
Koch Chemie Micro Cut And Finish P3 01 250 ML

Koch Chemie Micro Cut And Finish P3 01 250 ML

  • Rs.5,199

Micro Cut & Finish P3.01

Micro polishing compound with carnauba wax

Micro Cut & Finish is the latest generation machine micro-polish for the permanent removal of streaks, holograms, fine scratches and sanding marks to P3000 grain size on all paint systems (including scratch-resistant) with simultaneous long-term sealing with high degree of gloss and smoothness. Through the use of highly specialised, extremely homogenous abrasive bodies, a brilliant permanent high gloss finish is created under extreme light conditions even on dark and similarly sensitive shades. Holograms and fine scratches are eliminated mechanically and not, which is often the case, covered over. Micro Cut & Finish is economical, easy to polish and to remove. Contains carnauba wax and non-fugitive silicones. Cut: 3,2 Gloss: 9,5

Areas of use
Paintwork of cars, commercial vehicles, motor cycles, etc.

Recommendations for use
For optimum results we recommend using our Micro Cut Pad and an orbital polisher with forced rotation (eg Makita PO5000C, highest speed). Alternatively a rotary polisher can be used in combination with our Micro Cut Pad. Before use, moisten dried or new pads completely with polish. With the machine switched off, apply the polish evenly over the surface to be treated and then polish crosswise with medium pressure thoroughly. Afterwards polish wit low pressure. Do not use pads used with this product for other products. For non-scratch and groove-free removal of polish residues we recommend our non-chainstitched Profi microfibre cloth that has been ultrasonically cut.

Warnings
Shake before using.;Before using, check suitability and compatibility.;Do not use on hot surfaces.;Protect against frost and excessive heat.

We Also Recommend
Sold Out
ARMOR ALL SHIELD WAX (500 ml) - Autohub Pakistan

ARMOR ALL SHIELD WAX (500 ml)

Rs.3,599
Sold Out
Meguiars Individual Clay Bar

Meguiars Individual Clay Bar

Rs.4,450
SONAX Polish & Wax Color NanoPro Silver/Grey(500ML)

SONAX Polish & Wax Color NanoPro Silver/Grey(500ML)

Rs.2,750
Meguiar's Ultimate Wash and Wax

Meguiar's Ultimate Wash and Wax

Rs.5,699
MEGUIAR'S SUPREME SHINE MICROFIBER TOWEL - (3 PACK) - Autohub Pakistan

Meguiar's Supreme Shine Microfiber Towel - (3 Pcs Pack)

Rs.4,499

Related Products

Koch Chemie Micro Cut And Finish P3 01 250 ML

Pay Cash On Delivery *

Free delivery **

* Only for Pakistan

** Not valid for tyres or heavy items

Note: Any order above 10 thousand require upfront money using Bank transfer or Easy Paisa

Rs.5,199 PKR

Micro Cut & Finish P3.01

Micro polishing compound with carnauba wax

Micro Cut & Finish is the latest generation machine micro-polish for the permanent removal of streaks, holograms, fine scratches and sanding marks to P3000 grain size on all paint systems (including scratch-resistant) with simultaneous long-term sealing with high degree of gloss and smoothness. Through the use of highly specialised, extremely homogenous abrasive bodies, a brilliant permanent high gloss finish is created under extreme light conditions even on dark and similarly sensitive shades. Holograms and fine scratches are eliminated mechanically and not, which is often the case, covered over. Micro Cut & Finish is economical, easy to polish and to remove. Contains carnauba wax and non-fugitive silicones. Cut: 3,2 Gloss: 9,5

Areas of use
Paintwork of cars, commercial vehicles, motor cycles, etc.

Recommendations for use
For optimum results we recommend using our Micro Cut Pad and an orbital polisher with forced rotation (eg Makita PO5000C, highest speed). Alternatively a rotary polisher can be used in combination with our Micro Cut Pad. Before use, moisten dried or new pads completely with polish. With the machine switched off, apply the polish evenly over the surface to be treated and then polish crosswise with medium pressure thoroughly. Afterwards polish wit low pressure. Do not use pads used with this product for other products. For non-scratch and groove-free removal of polish residues we recommend our non-chainstitched Profi microfibre cloth that has been ultrasonically cut.

Warnings
Shake before using.;Before using, check suitability and compatibility.;Do not use on hot surfaces.;Protect against frost and excessive heat.

comments powered by Disqus

Your cart is empty.

Koch Chemie Micro Cut And Finish P3 01 250 ML

Koch Chemie Micro Cut And Finish P3 01 250 ML

  • Rs.5,199

Micro Cut & Finish P3.01

Micro polishing compound with carnauba wax

Micro Cut & Finish is the latest generation machine micro-polish for the permanent removal of streaks, holograms, fine scratches and sanding marks to P3000 grain size on all paint systems (including scratch-resistant) with simultaneous long-term sealing with high degree of gloss and smoothness. Through the use of highly specialised, extremely homogenous abrasive bodies, a brilliant permanent high gloss finish is created under extreme light conditions even on dark and similarly sensitive shades. Holograms and fine scratches are eliminated mechanically and not, which is often the case, covered over. Micro Cut & Finish is economical, easy to polish and to remove. Contains carnauba wax and non-fugitive silicones. Cut: 3,2 Gloss: 9,5

Areas of use
Paintwork of cars, commercial vehicles, motor cycles, etc.

Recommendations for use
For optimum results we recommend using our Micro Cut Pad and an orbital polisher with forced rotation (eg Makita PO5000C, highest speed). Alternatively a rotary polisher can be used in combination with our Micro Cut Pad. Before use, moisten dried or new pads completely with polish. With the machine switched off, apply the polish evenly over the surface to be treated and then polish crosswise with medium pressure thoroughly. Afterwards polish wit low pressure. Do not use pads used with this product for other products. For non-scratch and groove-free removal of polish residues we recommend our non-chainstitched Profi microfibre cloth that has been ultrasonically cut.

Warnings
Shake before using.;Before using, check suitability and compatibility.;Do not use on hot surfaces.;Protect against frost and excessive heat.

We Also Recommend
Sold Out
ARMOR ALL SHIELD WAX (500 ml) - Autohub Pakistan

ARMOR ALL SHIELD WAX (500 ml)

Rs.3,599
Sold Out
Meguiars Individual Clay Bar

Meguiars Individual Clay Bar

Rs.4,450
SONAX Polish & Wax Color NanoPro Silver/Grey(500ML)

SONAX Polish & Wax Color NanoPro Silver/Grey(500ML)

Rs.2,750
Meguiar's Ultimate Wash and Wax

Meguiar's Ultimate Wash and Wax

Rs.5,699
MEGUIAR'S SUPREME SHINE MICROFIBER TOWEL - (3 PACK) - Autohub Pakistan

Meguiar's Supreme Shine Microfiber Towel - (3 Pcs Pack)

Rs.4,499

Related Products

Koch Chemie Micro Cut And Finish P3 01 250 ML

Pay Cash On Delivery *

Free delivery **

* Only for Pakistan

** Not valid for tyres or heavy items

Note: Any order above 10 thousand require upfront money using Bank transfer or Easy Paisa

Rs.5,199 PKR

Micro Cut & Finish P3.01

Micro polishing compound with carnauba wax

Micro Cut & Finish is the latest generation machine micro-polish for the permanent removal of streaks, holograms, fine scratches and sanding marks to P3000 grain size on all paint systems (including scratch-resistant) with simultaneous long-term sealing with high degree of gloss and smoothness. Through the use of highly specialised, extremely homogenous abrasive bodies, a brilliant permanent high gloss finish is created under extreme light conditions even on dark and similarly sensitive shades. Holograms and fine scratches are eliminated mechanically and not, which is often the case, covered over. Micro Cut & Finish is economical, easy to polish and to remove. Contains carnauba wax and non-fugitive silicones. Cut: 3,2 Gloss: 9,5

Areas of use
Paintwork of cars, commercial vehicles, motor cycles, etc.

Recommendations for use
For optimum results we recommend using our Micro Cut Pad and an orbital polisher with forced rotation (eg Makita PO5000C, highest speed). Alternatively a rotary polisher can be used in combination with our Micro Cut Pad. Before use, moisten dried or new pads completely with polish. With the machine switched off, apply the polish evenly over the surface to be treated and then polish crosswise with medium pressure thoroughly. Afterwards polish wit low pressure. Do not use pads used with this product for other products. For non-scratch and groove-free removal of polish residues we recommend our non-chainstitched Profi microfibre cloth that has been ultrasonically cut.

Warnings
Shake before using.;Before using, check suitability and compatibility.;Do not use on hot surfaces.;Protect against frost and excessive heat.

comments powered by Disqus