Hengst H97W05 Honda Oil Filter – Engine Oil Filter

Premium Replacement Oil Filter for Compatible Honda Vehicles

Hengst H97W05 Engine Oil Filter is a premium spin-on oil filter designed for a wide range of compatible Honda applications. It is cross-referenced with Honda OE Part No. 15400-RAF-T01, a genuine Honda oil-filter reference used across numerous Honda vehicles.

The filter is designed to remove contaminants and impurities from engine oil before the oil circulates through critical engine components. By helping maintain cleaner engine oil, Hengst H97W05 supports effective lubrication, reduced contaminant-related wear and reliable engine performance.

Honda OE 15400-RAF-T01 has been used across applications including Honda City, Civic, Accord, Brio, Ballade, CR-V, Fit/Jazz, HR-V and other models, depending on engine and market specification. Exact fitment should always be confirmed before purchase. 

Key Features

• Premium Hengst replacement engine oil filter
• Hengst Part Number: H97W05
• Honda OE Part Number: 15400-RAF-T01
• Spin-on oil filter design
• Helps remove dirt, metal particles and other contaminants from engine oil
• Supports clean oil circulation
• Helps protect bearings, pistons, camshafts and other lubricated components
• Designed for reliable filtration and oil flow
• Application-specific replacement fit
• Suitable for a wide range of Honda applications

Honda Compatibility

The Hengst H97W05 is used across numerous Honda applications.

Honda OE Reference

15400-RAF-T01

Common Honda Applications

Depending on model year and engine configuration, applications include:

• Honda City
• Honda Civic
• Honda Accord
• Honda CR-V
• Honda Brio
• Honda Brio Amaze
• Honda Ballade
• Honda Jazz / Fit
• Honda HR-V
• Honda Vezel
• Honda Insight
• Honda CR-Z
• Honda Stream
• Honda Freed
• Other compatible Honda applications

Hengst’s catalogue lists H97W05 against numerous Honda OE references, while vehicle-specific catalogue data confirms its use across multiple Honda models. 

Important: Do not assume H97W05 fits every Honda vehicle. Always match 15400-RAF-T01 / H97W05 against the exact vehicle model, year and engine before ordering.

Why Engine Oil Filtration Matters

Engine oil continuously circulates through the engine and can collect microscopic contaminants generated through normal operation.

These contaminants can include:

• Dust and dirt
• Metal wear particles
• Carbon deposits
• Sludge particles
• Other suspended impurities

A quality oil filter helps capture these contaminants before they circulate through critical engine components. Hengst H97W05 is engineered to provide reliable filtration while maintaining the oil flow required for effective engine lubrication.

Benefits

Effective Filtration

Helps remove contaminants and impurities from engine oil before they circulate through the engine.

Engine Protection

Cleaner oil helps reduce the exposure of critical engine components to abrasive contaminants.

Reliable Oil Flow

Designed to provide effective filtration while supporting the oil flow required by the engine lubrication system.

Application-Specific Fit

The spin-on design provides straightforward replacement where H97W05 / 15400-RAF-T01 is specified.

Professional Maintenance

An ideal replacement filter for routine engine oil services on compatible Honda vehicles.

Product Specifications

• Brand: Hengst
• Part Number: H97W05
• Product Type: Engine Oil Filter
• Filter Design: Spin-On
• Honda OE Number: 15400-RAF-T01
• Thread: M20 × 1.5
• Outer Diameter: Approx. 65.5 mm
• Outer Diameter 1: Approx. 61.5 mm
• Height: Approx. 87 mm
• Inner Diameter: Approx. 54.5 mm
• Application: Compatible Honda vehicles
• Installation: Direct replacement where specified

Hengst’s official technical catalogue lists H97W05 with an M20×1.5 thread, approximately 65.5 mm outer diameter and 87 mm height. 

How to Replace

1. Warm the engine according to the vehicle manufacturer’s recommended procedure.
2. Switch off the engine and safely access the oil filter.
3. Drain the old engine oil.
4. Remove the existing oil filter using the appropriate filter wrench.
5. Clean the filter mounting surface.
6. Apply a thin layer of fresh engine oil to the new filter gasket.
7. Install the Hengst H97W05 according to the manufacturer’s recommended procedure.
8. Refill the engine with the correct specification and quantity of engine oil.
9. Start the engine and allow it to run briefly.
10. Check the filter and drain area for leaks.
11. Check the engine oil level and top up if required.

Professional Tip

Replace the oil filter whenever the engine oil is changed unless the vehicle manufacturer specifies otherwise.

Genuine Hengst Quality

Hengst is a German filtration specialist with extensive experience in automotive filtration. Its filtration products are engineered around application-specific requirements with a focus on reliable filtration, proper fitment and consistent performance.

Hengst H97W05 is designed to provide dependable engine-oil filtration for a broad range of compatible applications.

Important Fitment Note

Honda 15400-RAF-T01 is a widely used oil-filter reference, but Honda has used several interchangeable and superseding oil-filter part numbers across different markets and generations.

The Honda OE number 15400-RAF-T01 is documented as being replaced by later Honda references in some applications.

For accurate fitment, verify:

Hengst H97W05 → Honda 15400-RAF-T01 → Exact Vehicle Model / Year / Engine

Frequently Asked Questions

What is Hengst H97W05?

Hengst H97W05 is a spin-on engine oil filter designed for a wide range of compatible automotive applications, including numerous Honda vehicles.

What is the Honda OE number?

The Honda OE reference supplied for this product is: 15400-RAF-T01

Is Hengst H97W05 suitable for Honda City?

Yes, H97W05 / 15400-RAF-T01 is used in compatible Honda City applications. Exact fitment depends on model year and engine. 

Is it suitable for Honda Civic?

Yes, H97W05 is listed for multiple Honda Civic applications, including various Civic generations and engines. 

Is it suitable for Honda Accord?

Yes, 15400-RAF-T01 is documented for compatible Honda Accord applications. Exact model-year and engine verification is recommended. 

Does it fit all Honda models?

Not necessarily. H97W05 is used across a very broad range of Honda applications, but Honda uses different oil-filter specifications across certain engines and generations. Always verify the OE number and vehicle application before ordering.

What type of oil filter is H97W05?

It is a spin-on engine oil filter.

What is the thread size?

Hengst specifies an M20 × 1.5 thread for H97W05. 

When should the oil filter be replaced?

For routine maintenance, replace the oil filter during each engine oil change unless the vehicle manufacturer specifies a different interval.

Hengst H97W05 Honda Oil Filter

• Hengst H97W05
• Honda 15400-RAF-T01
• Honda Oil Filter
• Honda Engine Oil Filter
• Honda City Oil Filter
• Honda Civic Oil Filter
• Honda Accord Oil Filter
• Honda CR-V Oil Filter
• Honda Jazz Oil Filter
• Honda HR-V Oil Filter
• Honda Vezel Oil Filter
• Honda Brio Oil Filter
• Honda Oil Filter Pakistan
• Hengst Oil Filter Pakistan
• Spin-On Oil Filter
• AutoHub Pakistan