KORREK Pro TFC™ Hydrox is a time-saving ceramic wet coating that creates an immediate water and dirt-repellent protective effect on all vehicle exterior surfaces. The extremely simple application of Hydrox is ready in 5 minutes!
Note when using this product: the product must not dry on surfaces as drying causes streak marks.
Instructions:
Treat one panel (e.g., a door) at a time with approximately 1-2 sprays per panel.
Rinse immediately, including adjacent panels.
Wipe and polish the surfaces to remove any residue.
Do not use in sunlight or on warm surfaces.
Hydroxprotective effect is activated by water: simply spray onto the cleaned, still wet surface, rinse with water and theceramic coating protection(e.g. against road salt, UV radiation, tar, etc.)is created immediately.Gives amirror-like shine to paint and metal surfacesandmakes them highly repellent against water and dirt. Thanks to the user-friendly SiO2-based coating,dirt does not stickto the surfaces of the car directly. Instead, it can be removed easily from the treated surfaces. Hydrox is especially suitable for the maintenance treatment of aKORREK Pro TFC™ Polymatrixcoating.
Size
700 ml
Usage
Use at temperatures between +5 and +25°C, never apply onto hot surfaces. Do not let the product freeze.
Instructions for use:
Thoroughly wash the vehicle before using Hydrox. Recommendation: Use a wax- or silicone free shampoo to clean the vehicle, e.g.KORREK Pro High Foam Shampoo.
Shake the bottle before use. Spray Hydrox on the freshly washed and still wet surface. About 2-6 sprays per vehicle surface (e.g. engine bonnet) are sufficient.
Rinse the treated area immediately with water to prevent Hydrox from drying on the surface. The product is activated by water and the water pressure spreads the product evenly on the surfaces. Use therefore a separate shower connected to water outlet or a high-pressure washer.
Finalize the treatment by wiping off any water drops with a microfiber cloth.
Recommendation:In order to strengthen and extend the protective effect of Hydrox, wash the vehicle in future withKORREK Pro TFC™ Reloadceramic coating shampoo. All KORREK Pro products can be easily combined with one another.
Where to use
All exterior surfaces of the vehicle: paint, rubber, plastic, aluminum, chrome, foiled and matt surfaces or side windows.
Launched in 2016, the KORREK Pro TFC™ product range was developed to meet the need for an easier way to protect a car’s paint finish. The products are based on novel technology that enables you to apply a ceramic thin film coating to your car yourself. Developed, tested and manufactured in Finland, KORREK Pro TFC™ product range is ideal for the harsh Nordic conditions.
Note: Any order above 10 thousand require upfront money using Bank transfer or Easy Paisa
Rs.7,850 PKR
KORREK Pro TFC™ Hydrox
KORREK Pro TFC™ Hydrox is a time-saving ceramic wet coating that creates an immediate water and dirt-repellent protective effect on all vehicle exterior surfaces. The extremely simple application of Hydrox is ready in 5 minutes!
Note when using this product: the product must not dry on surfaces as drying causes streak marks.
Instructions:
Treat one panel (e.g., a door) at a time with approximately 1-2 sprays per panel.
Rinse immediately, including adjacent panels.
Wipe and polish the surfaces to remove any residue.
Do not use in sunlight or on warm surfaces.
Hydroxprotective effect is activated by water: simply spray onto the cleaned, still wet surface, rinse with water and theceramic coating protection(e.g. against road salt, UV radiation, tar, etc.)is created immediately.Gives amirror-like shine to paint and metal surfacesandmakes them highly repellent against water and dirt. Thanks to the user-friendly SiO2-based coating,dirt does not stickto the surfaces of the car directly. Instead, it can be removed easily from the treated surfaces. Hydrox is especially suitable for the maintenance treatment of aKORREK Pro TFC™ Polymatrixcoating.
Size
700 ml
Usage
Use at temperatures between +5 and +25°C, never apply onto hot surfaces. Do not let the product freeze.
Instructions for use:
Thoroughly wash the vehicle before using Hydrox. Recommendation: Use a wax- or silicone free shampoo to clean the vehicle, e.g.KORREK Pro High Foam Shampoo.
Shake the bottle before use. Spray Hydrox on the freshly washed and still wet surface. About 2-6 sprays per vehicle surface (e.g. engine bonnet) are sufficient.
Rinse the treated area immediately with water to prevent Hydrox from drying on the surface. The product is activated by water and the water pressure spreads the product evenly on the surfaces. Use therefore a separate shower connected to water outlet or a high-pressure washer.
Finalize the treatment by wiping off any water drops with a microfiber cloth.
Recommendation:In order to strengthen and extend the protective effect of Hydrox, wash the vehicle in future withKORREK Pro TFC™ Reloadceramic coating shampoo. All KORREK Pro products can be easily combined with one another.
Where to use
All exterior surfaces of the vehicle: paint, rubber, plastic, aluminum, chrome, foiled and matt surfaces or side windows.
Launched in 2016, the KORREK Pro TFC™ product range was developed to meet the need for an easier way to protect a car’s paint finish. The products are based on novel technology that enables you to apply a ceramic thin film coating to your car yourself. Developed, tested and manufactured in Finland, KORREK Pro TFC™ product range is ideal for the harsh Nordic conditions.
KORREK Pro TFC™ Hydrox is a time-saving ceramic wet coating that creates an immediate water and dirt-repellent protective effect on all vehicle exterior surfaces. The extremely simple application of Hydrox is ready in 5 minutes!
Note when using this product: the product must not dry on surfaces as drying causes streak marks.
Instructions:
Treat one panel (e.g., a door) at a time with approximately 1-2 sprays per panel.
Rinse immediately, including adjacent panels.
Wipe and polish the surfaces to remove any residue.
Do not use in sunlight or on warm surfaces.
Hydroxprotective effect is activated by water: simply spray onto the cleaned, still wet surface, rinse with water and theceramic coating protection(e.g. against road salt, UV radiation, tar, etc.)is created immediately.Gives amirror-like shine to paint and metal surfacesandmakes them highly repellent against water and dirt. Thanks to the user-friendly SiO2-based coating,dirt does not stickto the surfaces of the car directly. Instead, it can be removed easily from the treated surfaces. Hydrox is especially suitable for the maintenance treatment of aKORREK Pro TFC™ Polymatrixcoating.
Size
700 ml
Usage
Use at temperatures between +5 and +25°C, never apply onto hot surfaces. Do not let the product freeze.
Instructions for use:
Thoroughly wash the vehicle before using Hydrox. Recommendation: Use a wax- or silicone free shampoo to clean the vehicle, e.g.KORREK Pro High Foam Shampoo.
Shake the bottle before use. Spray Hydrox on the freshly washed and still wet surface. About 2-6 sprays per vehicle surface (e.g. engine bonnet) are sufficient.
Rinse the treated area immediately with water to prevent Hydrox from drying on the surface. The product is activated by water and the water pressure spreads the product evenly on the surfaces. Use therefore a separate shower connected to water outlet or a high-pressure washer.
Finalize the treatment by wiping off any water drops with a microfiber cloth.
Recommendation:In order to strengthen and extend the protective effect of Hydrox, wash the vehicle in future withKORREK Pro TFC™ Reloadceramic coating shampoo. All KORREK Pro products can be easily combined with one another.
Where to use
All exterior surfaces of the vehicle: paint, rubber, plastic, aluminum, chrome, foiled and matt surfaces or side windows.
Launched in 2016, the KORREK Pro TFC™ product range was developed to meet the need for an easier way to protect a car’s paint finish. The products are based on novel technology that enables you to apply a ceramic thin film coating to your car yourself. Developed, tested and manufactured in Finland, KORREK Pro TFC™ product range is ideal for the harsh Nordic conditions.
Note: Any order above 10 thousand require upfront money using Bank transfer or Easy Paisa
Rs.7,850 PKR
KORREK Pro TFC™ Hydrox
KORREK Pro TFC™ Hydrox is a time-saving ceramic wet coating that creates an immediate water and dirt-repellent protective effect on all vehicle exterior surfaces. The extremely simple application of Hydrox is ready in 5 minutes!
Note when using this product: the product must not dry on surfaces as drying causes streak marks.
Instructions:
Treat one panel (e.g., a door) at a time with approximately 1-2 sprays per panel.
Rinse immediately, including adjacent panels.
Wipe and polish the surfaces to remove any residue.
Do not use in sunlight or on warm surfaces.
Hydroxprotective effect is activated by water: simply spray onto the cleaned, still wet surface, rinse with water and theceramic coating protection(e.g. against road salt, UV radiation, tar, etc.)is created immediately.Gives amirror-like shine to paint and metal surfacesandmakes them highly repellent against water and dirt. Thanks to the user-friendly SiO2-based coating,dirt does not stickto the surfaces of the car directly. Instead, it can be removed easily from the treated surfaces. Hydrox is especially suitable for the maintenance treatment of aKORREK Pro TFC™ Polymatrixcoating.
Size
700 ml
Usage
Use at temperatures between +5 and +25°C, never apply onto hot surfaces. Do not let the product freeze.
Instructions for use:
Thoroughly wash the vehicle before using Hydrox. Recommendation: Use a wax- or silicone free shampoo to clean the vehicle, e.g.KORREK Pro High Foam Shampoo.
Shake the bottle before use. Spray Hydrox on the freshly washed and still wet surface. About 2-6 sprays per vehicle surface (e.g. engine bonnet) are sufficient.
Rinse the treated area immediately with water to prevent Hydrox from drying on the surface. The product is activated by water and the water pressure spreads the product evenly on the surfaces. Use therefore a separate shower connected to water outlet or a high-pressure washer.
Finalize the treatment by wiping off any water drops with a microfiber cloth.
Recommendation:In order to strengthen and extend the protective effect of Hydrox, wash the vehicle in future withKORREK Pro TFC™ Reloadceramic coating shampoo. All KORREK Pro products can be easily combined with one another.
Where to use
All exterior surfaces of the vehicle: paint, rubber, plastic, aluminum, chrome, foiled and matt surfaces or side windows.
Launched in 2016, the KORREK Pro TFC™ product range was developed to meet the need for an easier way to protect a car’s paint finish. The products are based on novel technology that enables you to apply a ceramic thin film coating to your car yourself. Developed, tested and manufactured in Finland, KORREK Pro TFC™ product range is ideal for the harsh Nordic conditions.
